rail | power FNC
Proven for millions of times, unique worldwide:
Since 1983, our fibre-nickel-cadmium (FNC) technology has been convincing with high reliability and extreme cycle stability of over 3000 cycles (IEC60623). With its wide range of capacities and performance classes, it can be used flexibly and can be optimally adapted to your needs. Even at extreme temperatures, it ensures the safety of your railway application.
trak | uplift quadro
With its excellent performance, the trak | uplift quadro offers an increase in driving time of up to +75%, especially for heavy-duty applications, vehicles with high tonnage, and applications with demanding and dynamic load profiles, while at the same time offering energy savings of up to 8%.
Thus, the trak | uplift quadro combines high-current discharge performance with increased service life in cycle applications.
The included Protective Shell Separator effectively protects against short circuits resulting from the accumulation of free active material on the negative electrode. A pole bushing with labyrinth system, specially developed for the daily demands of forklift operation, withstands even heavy mechanical stresses and ensures reliable operation with reduced maintenance. In addition, the trak | uplift quadro is equipped with Active Carbon Inside and the trak | air electrolyte circulation system as standard.
trak | powerpack lion
The energy system always comprises a lithium-ion battery and a corresponding charger. The design of the chargers ensures that the lithium-ion batteries are charged with maximum efficiency while also promoting careful handling of the batteries, in order to guarantee that their service life is as long as possible. In addition to the tray-in-tray concept, several models with different capacities are available. Each of these models can be used in a different temperature range.
Take advantage of the smooth, reliable operation that is made possible by trak | powerpack lion.
grid | power V H bloc
The batteries are not only ideal for high- current applications, they are also ideally suited for partial cyclical use. grid | power V H batteries offer an excellent, very long expected service life, increased operational reliability and combine excellent performance with a robust design. Typical areas of application for the product range are power plants and energy supply systems, uninterruptible power supply (UPS), switchgear, safety lighting systems, as a battery for starting diesel and emergency power generators, as well as railway infrastructure applications.
The product design according to DIN 40738 ensures maximum compatibility when replacing and expanding existing systems and battery systems. In combination with the recombination system HOPPECKE grid | aquagen you have the option of reducing maintenance costs right through to being maintenance-free.
power.com H.C
rail | power HNCS
rail | power PzS
power.com XC
grid | Xtreme VR
rail | power AGM
As a result, this technology not only offers the benefits of a fleece battery, but also those of a gel battery. The batteries are installed in casings made of stable polypropylene or ABS. rail | power AGM batteries have been working reliably as on-board batteries in all railway vehicles. They have also been used as starter batteries in diesel vehicles.
The batteries are resistant to shocks and vibrations that are well above the relevant requirements for railway batteries.
power.com SA
HOPPECKE power.com SA batteries are based on the use of flat plates with electrolyte in gel.
Due to the gel technology, HOPPECKE power.com SA batteries have high stability and long lifetime.
trak | fnc
The advantages offered by the trak | powerpack fnc become fully apparent in companies that operate or produce around the clock.
The special properties of this alkaline battery mean that battery changing is not required. The vehicle and battery can be used 24 hours a day by taking advantages of daily work breaks for opportunity charging. At the same time, virtually 100% availability of your vehicles enables you to optimise your vehicle fleet size….Read more
The extremely high mechanical stability of trak | fnc batteries provides long-term resistance to vibrations and rough handling. The electrode material has withstood shock tests of up to 30g* (*g = acceleration due to gravity at the Earth’s surface of 9.80 m/s²). The robust design of the cell ensures absolutely reliable energy storage, even under the most severe operating conditions. The reduced sensitivity of the FNC battery to external factors (e.g. low temperatures) or improper handling almost entirely rules out the risk of a sudden battery failure.
A battery control unit that was designed by HOPPECKE especially for this system provides the driver with information about the availability of their vehicle, the battery capacity and the charging current at all times. A charging schedule is calculated based on the usage profile of the vehicle, so that the normal daily sequence of operations is not interrupted by unforeseen opportunity charging. In addition, the battery monitoring unit has the additional task of countering any improper use by drawing the driver’s attention to the need for charging by stopping lifting movement. Other functions such as recording operating hours or energy balancing are also integrated and round off the system.
trak | uplift save
trak | uplift save⁺
trak | uplift air
HOPPECKE trak | air electrolyte circulation prevents acid layering by means of blown in air. In comparison with other mixing methods this has the highest level of effectiveness with the least load on the plate set and eliminates potentially necessary weekend equalisation charges. For you, this means that fewer replacement batteries are needed, and the general extension service life is extended. As intensive overcharging is no longer necessary with trak | uplift air the cycle lifespan is also increased. Due to the significant reduction of energy consumption you save money in operation and also ensure a higher availability of your battery system.
This reduces downtimes, so that you can plan your logistics better. In combination with a HOPPECKE charger, the batteries are charged gently and efficiently. The charger detects excess or low pressure in the air supply and automatically switches to an alternative charging mode as necessary. Together with the possibility of rapid charging for demanding 24/5 shift operation this results in the fail-proof trak | air control concept.
trak | uplift
In combination with the optimised active area ratio of the new 3D Enhanced Electrode Design, Active Carbon ensures increased service life for cyclic applications. In single shift operation trak | uplift batteries demonstrate their durability and economy. The Protective Shell Separator effectively protects against short circuits as a result of deposits of free active material on the negative electrode. A pole feed-through with a labyrinth system specially developed for the daily requirements of industrial trucks withstands even the highest mechanical strains and ensures reliable operation and reduced maintenance.
The trak | uplift battery is now available as a cost-optimised basic solution which is designed so that additional components such as trak | air electrolyte circulation can be retrofitted at any time. Customised or vehicle-specific adaptations are of course possible at any time.
FNC
FNC-VR
trak | power V L HPzB
As a result, the HOPPECKE trak | power VL HPzB are suitable for all conventional traction applications that require a fail-safe solution.
Our battery systems offer you maximum quality with low investment costs and maximum flexibility, meaning that you can retrofit additional components at any time, such as trak | air or trak | com. Furthermore, thanks to their robust plastic coating and the tray insulation that this creates, these systems are absolutely safe for operation.
trak | ex
The sealed and insulated HOPPECKE terminal-cell connector system prevents electrolyte infiltration and corrosion on the terminals.
trak | uplift ex uses an individually adapted direct current connector and a battery tray based on customer-specific vehicle dimensions. trak | uplift ex offers a comprehensive product range for categories 2 (Zone 1 and 21) and 3 (Zone 2 and 22) up to the T6 temperature class (80 °C).
By working closely with vehicle manufacturers and associations, HOPPECKE constantly develops solutions that are at the forefront of innovation – guaranteeing maximum investment security.
HOPPECKE has an extensive and specifically trained service network and is available as a competent contact partner throughout the entire life cycle of your energy storage systems.
trak | bloc
The design principle of the HOPPECKE trak | bloc batteries is based on the use of grid plates and ESS technology. Thanks to their high energy density, HOPPECKE trak | bloc batteries only take up a small amount of space, enabling you to maximize your use of the space available. The central degassing system integrated in the battery lid features an optional tube system and can be used carry out the mixture consisting of hydrogen and oxygen in a targeted manner. The flat battery lid with an integrated handle and the easy-clean surface ensure simple and convenient handling during assembly. The properties of the HOPPECKE trak | bloc batteries mean that they can be used in a wide range of applications.
The trak | bloc battery technology was developed by HOPPECKE at the beginning of the century and to date offers excellent reliability a long service life for industrial applications.
Take advantage of our comprehensive range of high-performance products with excellent high-current behaviour, which covers almost all conventional applications.
sun | power VR M
grid | power VR X & VRX-FT
grid | power VR M
power.com HC
net.power
max.power
trak | power V L - HPzS
grid | power V M
Make use of HOPPECKE’s know-how in this area and ensure that no risk is taken with the energy supply. In addition, the very high capacity density of the product can save you a lot of money and space; Convince yourself of the product performance and ask HOPPECKE for the project planning data, which was measured in accordance with IEC60896.
The DIN compatible batteries are transparent (ease of maintenance) and can be easily exchanged because they fit in the common DIN cabinets. IEEE and KTA approvals are available and accordingly this proven product is used and appreciated by customers.
grid | power V H
sun | power VR L
grid | power VR L
sun | power V L
grid | power V L
grid | power V X
Where grid | power V X batteries are absolutely reliable energy suppliers in critical applications. Thanks to its excellent behaviour within the entire discharge voltage load, they are ideally suited for high-current discharges of short duration and thus predestined for use in power plants and switchgear.
The product design according to DIN 40738 ensures maximum compatibility when replacing and expanding existing systems and battery installations. In combination with the recombination system HOPPECKE grid | aquagen you have the option of reducing maintenance costs to the point of being maintenance-free.